TM 5-2410-241-23-1
0020
Table 1. Powertrain Troubleshooting Procedures - Continued.
0020
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1405-5 Transmission Sole-
4. Remove two bolts (Figure 76,
noid Valve #5 Current
Item 3) and guard (Figure 76,
Below Normal - Contin-
Item 4) from machine.
ued
5. Remove 15 bolts (Figure 76,
Item 1) and plate (Figure 76,
Item 2) from machine.
Figure 76. Guard, Plate, and Retaining Hardware.
0020
6. Disconnect transmission solenoid
valve #5 connector P-C5 (WP
0018, Figure 75) from transmis-
sion solenoid valve #5 (WP 0145).
7. Insert a jumper wire between pins
1 and 2 on transmission solenoid
valve #5 connector P-C5 (WP
0018, Figure 75).
8. Turn ignition switch and battery
disconnect switch to ON position
(TM 5-2410-241-10).
9. Check for Diagnostic Codes (WP
1. If active 1405-6 code is present,
replace transmission solenoid
valve #5 (WP 0145). Ensure all
harness connectors are recon-
nected. Verify correct operation of
machine (TM 5-2410-241-10).
2. If active 1405-5 code is present,
proceed to step 10.