TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Ether Aid Does NOT Work -
24. Using digital multimeter (WP
1. If 24 Volts is found, proceed to
Continued
0296), measure for voltage
step 25.
between pin 1 on engine harness
2. If 24 Volts is NOT found, proceed
ether relay connector V-C18 (WP
to step 28.
0018, Figure 43) and ground.
25. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
26. Using digital multimeter (WP
1. If continuity is found, proceed to
0296), test for continuity between
step 27.
pin 4 on engine harness ether
2. If continuity is NOT found, replace
relay connector V-C18 (WP 0018,
engine harness (WP 0055).
Figure 43) and pin 1 engine har-
Ensure all harness connectors
ness ether injector solenoid con-
are reconnected. Verify correct
nector V-C2 (WP 0018, Figure
operation of machine (TM 5-2410-
179).
241-10).
27. Using digital multimeter (WP
1. If continuity is found, replace
0296), test for continuity pin 2 on
ether aid relay (WP 0060). Ensure
engine harness ether injector
all harness connectors are recon-
solenoid connector V-C2 (WP
nected. Verify correct operation of
0018, Figure 179) and ground.
machine (TM 5-2410-241-10).
2. If continuity is NOT found, replace
engine harness (WP 0055).
Ensure all harness connectors
are reconnected. Verify correct
operation of machine (TM 5-2410-
241-10).
28. Turn ignition switch and battery
disconnect switch to OFF position
(TM 5-2410-241-10).
29. Disconnect platform harness con-
nector MA-C22 (WP 0018, Figure
11) from engine harness connec-
tor V-C1 (WP 0018, Figure 12).
30. Using digital multimeter (WP
1.
If continuity is found, proceed to
0296), test for continuity between
step 31.
pin 24 on engine harness connec- 2.
If continuity is NOT found, replace
tor V-C1 (WP 0018, Figure 12)
engine harness (WP 0055).
and pin 1 engine harness ether
Ensure all harness connectors
relay connector V-C18 (WP 0018,
are reconnected. Verify correct
Figure 43).
operation of machine (TM 5-2410-
241-10).
31. Disconnect platform harness con-
nector MA-C3 (WP 0018, Figure
21) from fuse panel wiring har-
ness connector A-C1 (WP 0018,
Figure 22).
0022-148
