TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Ether Aid Does NOT Work -
32. Using digital multimeter (WP
1.
If continuity is found, proceed to
Continued
0296), test for continuity between
step 33.
pin 1 on platform harness connec- 2.
If continuity is NOT found, replace
tor MA-C3 (WP 0018, Figure 21)
platform harness (WP 0209).
and pin 24 platform harness con-
Ensure all harness connectors
nector MA-C22 (WP 0018, Figure
are reconnected. Verify correct
11).
operation of machine (TM 5-2410-
241-10).
33. Remove Fuse #1 (Figure 24, Item
1) from fuse panel (TM 5-2410-
241-10).
Figure 24. Fuse #1.
0022
Ether Aid Does NOT Work -
34. Using digital multimeter (WP
1.
If continuity is found, Replace
Continued
0296), test for continuity between
Fuse #1 (TM 5-2410-241-10).
pin 1 on fuse panel wiring harness
Ensure all harness connectors
connector A-C1 (WP 0018, Figure
are reconnected. Verify correct
22) and left cavity of Fuse #1 (Fig-
operation of machine (TM 5-2410-
ure 24, Item 1).
241-10).
2.
If continuity is NOT found, replace
fuse panel wiring harness (WP
0176). Replace Fuse #1 (TM 5-
2410-241-10). Ensure all harness
connectors are reconnected. Ver-
ify correct operation of machine
(TM 5-2410-241-10).
END OF WORK PACKAGE