TM 5-2410-241-23-1
0022
Table 1. Cab Troubleshooting Procedures - Continued.
0022
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Ether Aid Does NOT Work -
20. Remove Fuse #1 (Figure 23,
Continued
Item 1) from fuse panel (TM 5-
2410-241-10).
Figure 23. Fuse #1.
0022
21. Using digital multimeter (WP
1. If continuity is found, replace
0296), test for continuity between
ether aid solenoid (WP 0060).
blades of Fuse #1.
Install Fuse #1 on fuse panel (TM
5-2410-241-10). Ensure all har-
ness connectors are reconnected.
Verify correct operation of
machine (TM 5-2410-241-10).
2. If continuity is NOT found, replace
main engine harness (WP 0055).
Replace Fuse #1 (TM 5-2410-
241-10). Ensure all harness con-
nectors are reconnected. Verify
correct operation of machine (TM
5-2410-241-10).
22. Disconnect engine harness ether
relay connector V-C18 (WP 0018,
Figure 43) from ether relay.
23. Turn battery disconnect switch
and ignition switch to ON position
(TM 5-2410-241-10).
