TM 5-2410-241-23-1
0026
COOLING SYSTEM INSPECTION CONTINUED
10. Remove front engine bottom guard (WP 0199).
11. Inspect water pump inlet hose (Figure 5, Item 1) and two clamps (Figure 5, Item 2) for Class III leaks and dam-
age.
a. If leak is at clamps (Figure 5, Item 2), tighten clamp.
b. If water pump inlet hose (Figure 5, Item 1) is leaking or damaged, replace water pump inlet hose (WP
c.
If water temperature regulator outlet hose (Figure 5, Item 1) and clamps (Figure 5, Item 2) are OK, proceed
to step 12.
12. Inspect water temperature regulator outlet hose (Figure 5, Item 4) and two clamps (Figure 5, Item 3) for Class
III leaks and damage.
a. If leak is at the clamps (Figure 5, Item 3) tighten clamps.
b. If water temperature regulator outlet hose (Figure 5, Item 4) is leaking or damaged replace water tempera-
ture regulator outlet hose (WP 0049).
c.
If water temperature regulator outlet hose (Figure 5, Item 4) and clamps (Figure 5, Item 3) are OK, proceed
to step 13.
Figure 4. Lower Radiator Hoses.
0026