TM 5-2410-241-23-2
0057
ENGINE REMOVAL CONTINUED
N OT E
Cap and plug all hoses, lines and tubesto prevent contamination and leaks.
Tag and mark all hoses to aid installation.
15. Remove four bolts (Figure 6, Item 8), washers (Figure 6, Item 9), line (Figure 6, Item 7) and O-ring (Figure 6,
Item 10) from pump (Figure 6, Item 6). Discard O-ring.
16. Position line (Figure 6, Item 7) aside.
17. Loosen tube nut (Figure 6, Item 2) and remove two tee fittings (Figure 6, Item 4) and hose (Figure 6, Item 5)
from line (Figure 6, Item 1). Set hose and tee fittings aside.
18. Remove O-ring (Figure 6, Item 3) from tee fitting (Figure 6, Item 4). Discard O-ring.
Figure 6. Pump Lines.
0057