TM 5-2410-241-23-2
0060
ETHER VALVE REMOVAL CONTINUED
4. Remove tiedown strap (Figure 5, Item 11) and disconnect connector (Figure 5, Item 12) from connector
(Figure 5, Item 13). Discard tiedown strap.
5. Remove two nuts (Figure 5, Item 8), washers (Figure 5, Item 9), clip (Figure 5, Item 10), and bracket (Figure 5,
Item 7) from machine.
6. Remove gasket (Figure 5, Item 6) from valve (Figure 5, Item 14). Discard gasket.
7. Remove cap (Figure 5, Item 5) from housing (Figure 5, Item 1).
8. Remove screw (Figure 5, Item 2) and housing (Figure 5, Item 1) from bracket (Figure 5, Item 15).
9. Remove two bolts (Figure 5, Item 3), tether (Figure 5, Item 4), cap (Figure 5, Item 5), bracket (Figure 5,
Item 15), and valve (Figure 5, Item 14) from bracket (Figure 5, Item 7).
10. Remove fitting (Figure 5, Item 16) from valve (Figure 5, Item 14).
Figure 5. Ether Valve.
0060
END OF TASK