TM 5-2410-241-23-2
0060
ETHER RELAY REMOVAL
1. Disconnect engine harness connector (Figure 9, Item 5) from ether relay (Figure 9, Item 4). Position engine
harness connector aside.
2. Remove bolt (Figure 9, Item 3), washer (Figure 9, Item 2), and ether relay (Figure 9, Item 4) from bracket
(Figure 9, Item 1).
Figure 9. Ether Relay.
0060
END OF TASK
CLEANING AND INSPECTION
00060
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK