TM 5-2410-241-23-2
0080
REMOVAL CONTINUED
4. Remove eight bolts (Figure 2, Item 2) and washers (Figure 2, Item 3) from crankshaft damper (Figure 2,
Item 1).
5. Remove crankshaft damper (Figure 2, Item 1) from crankshaft pulley (Figure 2, Item 5).
6. Remove adapter (Figure 2, Item 4) from crankshaft pulley (Figure 2, Item 5).
Figure 2. Front Housing Cover.
0080
END OF TASK
CLEANING AND INSPECTION
00080
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
00080
1. Install adapter (Figure 2, Item 4) on crankshaft pulley (Figure 2, Item 5).
2. Install crankshaft damper (Figure 2, Item 1) on crankshaft pulley (Figure 2, Item 5).
3. Install eight washers (Figure 2, Item 3) and bolts (Figure 2, Item 2) on crankshaft damper (Figure 2, Item 1).
Tighten bolts to 41 lb-ft (55 Nm).
