TM 5-2410-241-23-2
0106
VALVE MECHANISM BASE AND INJECTOR HARNESS REMOVAL CONTINUED
000106
N OT E
Tag and mark electrical connector to aid installation.
3. Disconnect connector (Figure 4, Item 1) from valve cover base (Figure 4, Item 2). Position connector aside.
Figure 4. Harness Connector.
00106
4. Loosen clamp (Figure 5, Item 6) and remove hose (Figure 5, Item 7) from crankcase breather (Figure 5,
Item 1).
5. Remove four bolts (Figure 5, Item 2), washers (Figure 5, Item 3), crankcase breather (Figure 5, Item 1) and
gasket (Figure 5, Item 4) from valve cover base (Figure 5, Item 5). Discard gasket.
Figure 5. Crankcase Breather.
00106
