TM 5-2410-241-23-2
0115
REMOVAL CONTINUED
2. Evenly install three forcing screws (Figure 2, Item 2) in adapter (Figure 2, Item 1) and remove adapter from
hydrostatic drive motor (Figure 2, Item 3).
3. Remove forcing screws (Figure 2, Item 2) from adapter (Figure 2, Item 1).
Figure 2. Forcing Screws.
0115
4. Remove O-ring (Figure 3, Item 1) from adapter (Figure 3, Item 2). Discard O-ring.
Figure 3. O-ring.
0115
END OF TASK
CLEANING AND INSPECTION
000115
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK