• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 5. Track Frame Seals.
Figure 7. Track Adjuster Cylinder.

Field Maintenance Manual D7R Dozer Type I With Winch and Type II With Ripper
Page Navigation
  641    642    643    644    645  646  647    648    649    650    651  
img
.
TM 5-2410-241-23-2
0134
DISASSEMBLY
000134
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Track adjuster weighs approximately 95 lb (43 kg).
1. Remove four bolts (Figure 6, Item 4), washers (Figure 6, Item 3), and two stops (Figure 6, Item 5) from track
adjuster frame (Figure 6, Item 2).
2. With assistance, remove track adjuster (Figure 6, Item 1) from track adjuster frame (Figure 6, Item 2). Place
track adjuster on flat level surface.
Figure 6. Track Adjuster.
0134
0134-7


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.