TM 5-2410-241-23-2
0150
CHANGING RECOIL SPRING COMPARTMENT OIL CONTINUED
1. Clean area around cover plate (Figure 1, Item 3) on top of track roller (Figure 1, Item 4).
2. Remove four bolts (Figure 1, Item 1), washers (Figure 1, Item 2), cover plate (Figure 1, Item 3) and O-ring
(Figure 1, Item 5) from track roller (Figure 1, Item 4). Discard O-ring.
3. Pump oil out of track roller (Figure 1, Item 4).
4. Refer to LO 5-2410-241-13 for correct amount and type of oil. Fill track roller with oil. Maintain oil level to the
FULL mark.
5. Install new O-ring (Figure 1, Item 5), cover plate (Figure 1, Item 3), four washers (Figure 1, Item 2), and bolts
(Figure 1, Item 1) on track roller (Figure 1, Item 4).
6. Repeat steps for other recoil spring compartment.
Figure 1. Recoil Spring Compartment Oil Change.
0150
END OF TASK
END OF WORK PACKAGE