TM 5-2410-241-23-2
0151
TRANSMISSION OIL CHANGE CONTINUED
1. Remove rear bottom guard (WP 0199).
2. Remove plug (Figure 1, Item 1) from machine.
3. Remove O-ring (Figure 1, Item 2) from plug (Figure 1, Item 1). Discard O-ring.
N OT E
Transmission holds 34 gallons (128.7 liters).
4. Install 1" NPT nipple to depress valve (Figure 1, Item 3) and drain oil into suitable container.
5. Remove 1" NPT nipple from machine.
6. Install new O-ring (Figure 1, Item 2) on plug (Figure 1, Item 1).
7. Install plug (Figure 1, Item 1) on machine.
8. Install rear bottom guard (WP 0199).
Figure 1. Transmission Drain Plug.
0151
END OF TASK
WARN I N G
Oil should be warm to ensure it drains co pletely. Use caution to protect against burns,
m
when draining oil.
Contact with oil can damage skin. Wear gloves when handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Failure to follow these warningsmay cause injury to personnel.