TM 5-2410-241-23-2
0187
REMOVAL CONTINUED
5. Remove two bolts (Figure 2, Item 3), washers (Figure 2, Item 4), clip (Figure 2, Item 2), and plate (Figure 2,
Item 1) from hydraulic tank (Figure 2, Item 5).
Figure 2. Plate.
0187
WARN I N G
DO NOT disconnect or remove any hydraulic system hoses, tubes, or fittings unless
engine is shut down and hydraulic system pressure has been relieved. Tighten all
connections before applying pressure. Escaping hydraulic fluid under pressure can
penetrate skin.
At operating temperature, hydraulic oil is hot.Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Failure to follow these warnings may result in injury or death to personnel.