TM 5-2410-241-23-2
0186
HYDRAULIC SYSTEM PRESSURE RELEASE CONTINUED
WARN I N G
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before removing
any hydraulic fitting.
To prevent injury to personnel, wear protective eye covering and gloves.
Lubricating/hydraulic oils used in perfomance of maintenance can be very slippery.
r
Immediately wipe up any spills.
Failure to follow these warnings may result in injury or death to personnel.
5. Loosen fill cap (Figure 2, Item 1) to relieve pressure from hydraulic tank (Figure 2, Item 2).
6. If hydraulic fluid is to be drained, remove cap. If fluid drain is not required, tighten fill cap (Figure 2, Item 1)
7. Reinstall fill cap after fluid drain is complete.
Figure 2. Hydraulic System Fill Cap.
0186
END OF TASK
END OF WORK PACKAGE