TM 5-2410-241-23-2
0194
REMOVAL CONTINUED
6. Open front access on hydraulic tank.
7. Disconnect hose (Figure 4, Item 3) from pilot accumulator (Figure 4, Item 1).
8. Remove O-ring (Figure 4, Item 2) from pilot accumulator (Figure 4, Item 1). Discard O-ring.
9. Remove tiedown strap (Figure 4, Item 8) and hose (Figure 4, Item 3) from hydraulic suction tube (Figure 4,
Item 7). Discard tiedown strap.
10. Remove bolt (Figure 4, Item 5), washer (Figure 4, Item 6), clamp (Figure 4, Item 4), and hose (Figure 4, Item 3)
from hydraulic suction tube (Figure 4, Item 7). Remove hose from machine.
Figure 4. Pilot Accumulator.
0194
END OF TASK
CLEANING AND INSPECTION
000194
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
