TM 5-2410-241-23-3
0215
REMOVAL CONTINUED
2. Remove three bolts (Figure 2, Item 2), washers (Figure 2, Item 1), and cover (Figure 2, Item 3) from quick drop
valve (Figure 2, Item 4).
Figure 2. Valve Cover.
0215
WARN I N G
Contact with oil can damage skin. Wear gloveswhen handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Failure to follow these warnings may cause injury to personnel.
N OT E
Care must be taken to ensure that fluids ae contained during performance of inspection,
r
maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid
with suitable containers before opening any compartment or disassembling any
component containing fluids.
Dispose of all fluids accordingto local regulations and mandates.
Perform disassembly on a clean surface.
Clean exterior of component to prevent contamination.
Plug all lines, hoses and tubes to prevent contamination and leaks.
Tag and mark all hoses and lines to aid installation
