TM 5-2410-241-23-3
0215
REMOVAL CONTINUED
6. Remove four bolts (Figure 4, Item 5), washers (Figure 4, Item 6), and two brackets (Figure 4, Item 2) from
radiator guard (Figure 4, Item 1).
N OT E
O-rings will remove from tubes after quick drop valve is removed.
7. Remove eight bolts (Figure 4, Item 3), washers (Figure 4, Item 4), and quick drop valve (Figure 4, Item 7) from
machine.
8. Remove two O-rings (Figure 4, Item 8) from two tubes (Figure 4, Item 9). Discard O-rings.
Figure 4. Quick Drop Valve.
0215
END OF TASK
CLEANING AND INSPECTION
000215
N OT E
After cleaning, allow parts to air dry. Do not use rags, as rags may cause lint to be
deposited on parts. Perform cleaning, inspection, and assembly on a clean surface.
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK