TM 5-2410-241-23-3
0267
INSTALLATION CONTINUED
N OT E
Install shims as noted in removal.
3. Position four bolts (Figure 8, Item 4), half-yoke (Figure 8, Item 1), and shim pack (Figure 8, Item 2) on machine.
4. Install tilt cylinder (Figure 8, Item 3) and four nuts (Figure 8, Item 5) on machine. Tighten nuts to 460-580 lb-ft
(623-786 Nm).
Figure 8. Yoke.
0267
5. Install pin (Figure 9, Item 3), retainer (Figure 9, Item 2), and two bolts (Figure 9, Item 1) on machine. Tighten
bolts to 293-362 lb-ft (397-490 Nm).
Figure 9. Retainer and Pin.
0267