TM 5-2410-241-23-3
0267
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Tilt cylinder weighs approxmately 341 lb (155 kg).
i
Note location and quantity of shims for ease of installation.
6. Remove four nuts (Figure 5, Item 5), bolts (Figure 5, Item 4), half-yoke (Figure 5, Item 1), shim pack (Figure 5,
Item 2) and tilt cylinder (Figure 5, Item 3) from machine.
7. Remove sling from tilt cylinder (Figure 5, Item 3).
Figure 5. Yoke.
0267