TM 5-2410-241-23-3
0273
REMOVAL CONTINUED
10. Remove bolt (Figure 7, Item 6), washer (Figure 7, Item 7), and two clips (Figure 7, Item 5) from pump hose
(Figure 7, Item 4).
11. Disconnect tube nut (Figure 7, Item 3) and remove O-ring (Figure 7, Item 2) from tee (Figure 7, Item 1).
Remove pump hose (Figure 7, Item 4) from machine. Discard O-ring.
Figure 7. Pump Hose and Retainer.
0273
END OF TASK
CLEANING AND INSPECTION
000273
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK
INSTALLATION
000273
Lubricating/hydraulic oils used in performance of maintenance can be very slippery.
Immediately wipe up any spills. Failure to follow this warning may result in injury to
personnel.
N OT E
Install hoses and fittings as noted during removal.