TM 5-2410-241-23-3
0274
DRAIN
000274
1. Remove fill plug (Figure 1, Item 5) and O-ring (Figure 1, Item 6) from winch (Figure 1, Item 9). Discard O-ring.
2. Remove breather (Figure 1, Item 3) and O-ring (Figure 1, Item 4) from winch (Figure 1, Item 9). Discard O-ring.
3. Remove check plug (Figure 1, Item 1) and O-ring (Figure 1, Item 2) from winch (Figure 1, Item 9). Discard
O-ring.
N OT E
Gear case oil capacity is 16 qt (15 L).
4. Remove drain plug (Figure 1, Item 7) and O-ring (Figure 1, Item 8) from winch (Figure 1, Item 9). Allow oil to
drain into a suitable container. Discard O-ring.
Figure 1. Winch Plug Locations.
0274
END OF TASK
CLEANING AND INSPECTION
000274
Clean vent and plugs IAW Mechanical General Maintenance Instructions (WP 0295).
END OF TASK