TM 5-2410-240-10
0018
TIGHT TRACK ADJUSTMENT CONTINUED
C AU T I O N
When parking machine prior to beginning this procedure, allow machine to coast to a stop
from a forward direction. DO NOT use the brakes to stop the machine. Coasting to a stop
will allow for accurate measurement of track adjustment. Failure to follow this caution may
result in track maladjustment and accelerated wear of components.
4. Start machine (WP 0005).
5. Operate machine forward and rearward to equalize track adjustment pressure (WP 0005). Allow machine to
coast to a stop from a FORWARD direction.
6. Shut machine off, then engage parking brake (WP 0004).
7. Repeat inspection and adjustment procedures until track adjustment is correct.
8. Install valve cover (Figure 4, Item 2) and bolt (Figure 4, Item 1) on track assembly.
Figure 4. Track Valve Cover.
0018
END OF TASK