TM 5-2410-240-23-1
0019
Table 2. Engine Troubleshooting with Codes - Continued.
0019
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
0003-06 Cylinder #3 Injector Current
5. Using digital multimeter
Continuity - Forward fuel injector
Above Normal Continued
(WP 0283), test for continuity
harness is shorted. Replace for-
at G-C1 (WP 0018,
ward fuel injector harness
Figure 173) harness connec-
(WP 0104). Verify proper operation
tor terminal 3 and ground.
of machine (TM 5-2410-240-10).
No Continuity - Proceed to step 6.
6. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
between G-C1 (WP 0018,
ward fuel injector harness
Figure 173) harness connec-
(WP 0104). Verify proper operation
tor terminal 4 and all other ter-
of machine (TM 5-2410-240-10).
minals in G-C1 (WP 0018,
No Continuity - Proceed to step 7.
Figure 173) harness connec-
tor.
7. Using digital multimeter
Continuity - Forward fuel injector
(WP 0283), test for continuity
harness is shorted. Replace for-
at G-C1 (WP 0018, Figure
ward fuel injector harness
173) harness connector termi-
(WP 0104). Verify proper operation
nal 4 and ground.
of machine (TM 5-2410-240-10).
No Continuity - Fuel injector is
faulty. Replace fuel injector #3
(WP 0077).
Connect E-C13 (WP 0018,
Figure 112) to G-C1 (WP 0018,
Figure 173) at valve cover base.
Verify proper operation of machine
(TM 5-2410-240-10).
0003-07 Cylinder #3 Injector Not
Connect MSD (WP 0016). Select
0003-07 Active - Replace fuel
Responding Properly
engine ECM C6.6 D6K. Check for
injector #3 (WP 0077). Verify
any diagnostic codes (WP 0013).
proper operation of machine
(TM 5-2410-240-10).
No Active Codes - Problem does
not exist at this time. Resume nor-
mal operation.
0004-02 Cylinder #4 Injector Erratic,
Test Step 1: Check for Fuel
Intermittent, or Incorrect Code
Injector Diagnostic Codes.
1. Connect MSD (WP 0016).
Select engine ECM C6.6 D6K.
2. Start engine or attempt to start
engine (TM 5-2410-240-10).