TM 5-2410-240-23-1
0020
Table 2. Powertrain and Chassis Troubleshooting with Codes - Continued.
CID FMI CODE
Test or Inspection
Corrective Action
1708-06 Proportional Sole-
13. Using digital multimeter
Continuity - Proceed to step 14.
noid Valve (Right Drive
(WP 0283), test for continuity
No Continuity - Replace platform wir-
Motor) Current Above Nor-
between pin 60 on platform har-
ing harness (WP 0150, WP 0155).
mal - Continued
ness ECM J1 connector PL-C4
Ensure all harness connectors are
(WP 0018, Figure 217) and pin 17
reconnected. Verify proper operation
on platform harness to chassis
of machine (TM 5-2410-240-10).
harness connector PL-C18 (WP
0018, Figure 226).
14. Using digital multimeter (WP
No Continuity - Proceed to step 15.
0283), test for continuity between
Continuity - Replace platform wiring
pin 59 on platform harness ECM
harness (WP 0150, WP 0155).
J1 connector PL-C4 (WP 0018,
Ensure all harness connectors are
Figure 217) and all other pins on
reconnected. Verify proper operation
platform harness ECM J1 connec-
of machine (TM 5-2410-240-10).
tor PL-C4 (WP 0018, Figure 217).
15. Using digital multimeter (WP
No Continuity - Replace machine
0283), test for continuity between
ECM (WP 0147, WP 0149). Ensure all
pin 59 on platform harness ECM
harness connectors are reconnected.
J1 connector PL-C4 (WP 0018,
Verify proper operation of machine
Figure 217) and all other pins on
(TM 5-2410-240-10).
platform harness ECM J2 connec-
Continuity - Replace platform wiring
tor PL-C5 (WP 0018, Figure 218).
harness (WP 0150, WP 0155).
Ensure all harness connectors are
reconnected. Verify proper operation
of machine (TM 5-2410-240-10).
0020-129