TM 5-2410-240-23-1
0021
Table 2. Cab Troubleshooting With Codes. - Continued.
0021
CID FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2663-03 Cab Ventilation Duct Tem-
8. Using digital multimeter, test
No Continuity - Replace cab wir-
perature Sensor Voltage Above Nor-
for continuity (WP 0283)
ing harness (WP 0228). Ensure all
mal - Continued
between harness connector
harness connectors are recon-
C-C40 (WP 0018, Figure 30)
nected. Verify proper operation of
terminal 23 and terminal 24.
machine (TM 5-2410-240-10).
Continuity - Proceed to step 9.
9. Remove jumper wire from har-
ness connector C-C57
(WP 0018, Figure 40).
10. Disconnect harness connec-
tor FP-C3 (WP 0018, Figure
168) from harness connector
PL-C3 (WP 0018, Figure 216).
11. Using digital multimeter, test
No Continuity - Replace fuse
for continuity (WP 0283)
panel wiring harness (WP 0201).
between harness connector
Ensure all harness connectors are
FP-C5 (WP 0018, Figure 170)
reconnected. Verify proper opera-
terminal 23 and harness con-
tion of machine (TM 5-2410-240-
nector FP-C3 (WP 0018, Fig-
10).
ure 168) terminal 24.
Continuity - Proceed to step 12.
12. Using digital multimeter, test
No Continuity - Replace fuse
for continuity (WP 0283)
panel wiring harness (WP 0201).
between harness connector
Ensure all harness connectors are
FP-C5 (WP 0018, Figure 170)
reconnected. Verify proper opera-
terminal 24 and harness con-
tion of machine (TM 5-2410-240-
nector FP-C3 (WP 0018, Fig-
10).
ure 168) terminal 26.
Continuity - Proceed to step 13.
13. Using digital multimeter, test
No Continuity - Proceed to
for continuity (WP 0283)
step 14.
between harness connector
Continuity - Replace fuse panel
FP-C3 (WP 0018, Figure 168)
wiring harness (WP 0201). Ensure
terminal 24 and all other termi-
all harness connectors are recon-
nals in harness connector FP-
nected. Verify proper operation of
C3 (WP 0018, Figure 168).
machine (TM 5-2410-240-10).
14. Disconnect harness connec-
tor PL-C4 (WP 0018, Figure
217) from equipment ECM J1.
15. Using digital multimeter, test
No Continuity - Replace platform
for continuity (WP 0283)
wiring harness (WP 0150,
between harness connector
WP 0155). Ensure all harness con-
PL-C3 (WP 0018, Figure 216)
nectors are reconnected. Verify
terminal 24 and harness con-
proper operation of machine (TM
nector PL-C4 (WP 0018, Fig-
5-2410-240-10).
ure 217) terminal 53.
Continuity - Proceed to step 16.
0021-291