TM 5-2410-240-23-2
0039
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
Core assembly weighs approximately 225 lb (102 kg).
Note size and position of bolts and washers to aid installation.
25. Install lifting device on core assembly (Figure 10, Item 1). Support core assembly.
26. Remove two bolts (Figure 10, Item 3), four washers (Figure 10, Item 4), and two rubber mounts (Figure 10,
Item 5) from cooling module (Figure 10, Item 2).
27. Using lifting device and assistance, remove core assembly (Figure 10, Item 1) from cooling module (Figure 10,
Item 2). Place core assembly on flat level surface.
28. Remove lifting device from core assembly (Figure 10, Item 1).
Figure 10. Core Assembly and Cooling Module.
0039