TM 5-2410-240-23-2
0051
FOLLOW-ON TASKS
00051
1. If arctic kit heater equipped, install arctic kit heater (WP 0278).
2. If arctic kit heater equipped, install arctic kit heater fuel metering pump, hose and fittings (WP 0280).
3. If arctic kit heater equipped, install arctic kit heater hoses and fittings (WP 0279).
4. If arctic kit heater equipped, install arctic kit heater harness (WP 0277).
5. Install cooling module (WP 0039).
6. Install water hoses (WP 0040).
7. Install engine speed sensor (WP 0058).
8. Install engine wiring harness (WP 0046).
9. Install NATO slave and cables (WP 0047).
10. Install starter cables (WP 0145).
11. Install heater hoses (WP 0247).
12. Install fuel hoses (WP 0174).
13. Install hydraulic oil cooler hoses (WP 0109).
14. Install A/C lines (WP 0249).
15. Install A/C compressor (WP 0092).
16. Install air inlet, exhaust hoses, and check valve (WP 0041).
17. Install muffler (WP 0045).
18. Install hood support (WP 0188).
19. Install bottom guards (WP 0156).
20. Install front cab floor plate (WP 0205).
21. Fill fuel tank (TM 5-2410-240-10).
22. Evacuate and charge A/C System (WP 0254).
23. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0051-8