TM 5-2410-240-23-2
0076
INSTALLATION
00076
N OT E
Install wires as noted during removal.
1. Install new O-ring (Figure 3, Item 6) on speed sensor (Figure 3, Item 3).
2. Install speed sensor (Figure 3, Item 3) and bolt (Figure 3, Item 4) to engine (Figure 3, Item 5). Torque bolt to
16 lb-ft (22 Nm).
3. Connect harness connector (Figure 3, Item 2) to speed sensor (Figure 3, Item 3). Slide lock tab (Figure 3,
Item 1) to lock position.
Figure 3. Injection Pump Position Sensor.
0076
