TM 5-2410-240-23-2
0076
REMOVAL CONTINUED
N OT E
Tag and mark wires to aid installation.
3. Slide lock tab (Figure 2, Item 1) to unlock position and disconnect harness connector (Figure 2, Item 2) from
speed sensor (Figure 2, Item 3).
4. Remove bolt (Figure 2, Item 4) and speed sensor (Figure 2, Item 3) from engine (Figure 2, Item 5).
5. Remove O-ring (Figure 2, Item 6) from speed sensor (Figure 2, Item 3). Discard O-ring.
Figure 2. Injection Pump Position Sensor.
0076
END OF TASK
CLEANING AND INSPECTION
00076
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
