TM 5-2410-240-23-2
0077
INSTALLATION CONTINUED
C AU T I O N
If installing used valve links, ensure valve links are installed in original location and
orientation on cylinder head. Do not interchange location or orientation of valve links.
Failure to follow this caution may cause premature wear.
9. Install two valve links (Figure 9, Item 5) on valve springs (Figure 9, Item 6).
10. Ensure cups of pushrods (Figure 9, Item 4) are seated on ball of valve lifters. Position rocker arms (Figure 9,
Item 1) so ball of adjuster (Figure 9, Item 2) is in cup of pushrod. Finger tighten adjuster nut (Figure 9,
Item 3).
Figure 9. Valve Bridge Replacement.
0077
END OF TASK
FOLLOW-ON TASKS
00077
1. Adjust valve lash (WP 0102).
2. Install valve cover (WP 0104).
3. Load trim files on exchanged injectors (WP 0026).
4. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
