TM 5-2410-240-23-2
0078
REMOVAL CONTINUED
C AU T I O N
Fuel injectors must be reinstalled in original location in the cylinder head. Handle fuel
injector with care. Make a temporary identification mark on fuel injector. Failure to follow
this caution may cause engine damage.
5. Pry beneath six injector clamps (Figure 3, Item 3) to remove six fuel injectors (Figure 3, Item 2) and fuel injector
clamps (Figure 3, Item 3) from cylinder head (Figure 3, Item 1).
Figure 3. Fuel Injector Removal.
0078
6. Remove six sealing washers (Figure 4, Item 1) and six O-rings (Figure 4, Item 3) from six fuel injectors
(Figure 4, Item 2). Discard sealing washers and O-rings.
Figure 4. Fuel Injector Seals.
0078
END OF TASK
CLEANING AND INSPECTION
00078
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK