TM 5-2410-240-23-2
0109
REMOVAL CONTINUED
N OT E
Mark position and routing of hoses and clamps to aid installation.
Cap hydraulic lines, hoses, and fittings.
14. Remove hose (Figure 3, Item 4) from fitting (Figure 3, Item 3).
15. Remove fitting (Figure 3, Item 3) from cooler (Figure 3, Item 1).
16. Remove two O-rings (Figure 3, Item 2) from fitting (Figure 3, Item 3). Discard O-rings.
17. Remove hose (Figure 3, Item 5) from fitting (Figure 3, Item 7).
18. Remove fitting (Figure 3, Item 7) from cooler (Figure 3, Item 1).
19. Remove two O-rings (Figure 3, Item 6) from fitting (Figure 3, Item 7). Discard O-rings.
Figure 3. Cooler Hoses.
0109
END OF TASK