TM 5-2410-240-23-2
0109
INSTALLATION CONTINUED
N OT E
Install hoses and clamps as noted during removal.
Remove caps for lines, hoses, and fittings.
7. Install two new O-rings (Figure 5, Item 6) on manifold (Figure 5, Item 7).
8. Position pipe (Figure 5, Item 5) on machine.
9. Connect pipe (Figure 5, Item 5) on manifold (Figure 5, Item 7).
11. Position pipe (Figure 5, Item 8) on machine.
12. Connect pipe (Figure 5, Item 8) on manifold (Figure 5, Item 7).
13. Install two clamps (Figure 5, Item 12), washers (Figure 5, Item 13) and nuts (Figure 5, Item 14) on bracket
(Figure 5, Item 11).
14. Install clamp (Figure 5, Item 4), washer (Figure 5, Item 3) and bolt (Figure 5, Item 1) on bracket (Figure 5,
Item 2).
15. Install new O-ring (Figure 5, Item 15) on pipe (Figure 5, Item 5).
16. Connect hose (Figure 5, Item 16) on pipe (Figure 5, Item 5).
17. Install new O-ring (Figure 5, Item 9) on pipe (Figure 5, Item 8).
18. Connect hose (Figure 5, Item 8) on pipe (Figure 5, Item 10).
0109-6