TM 5-2410-240-23-2
0118
REMOVAL CONTINUED
12. Remove two bolts (Figure 5, Item 5), washers (Figure 5, Item 6), and guard (Figure 5, Item 7) from yoke
(Figure 5, Item 4).
13. Remove three bolts (Figure 5, Item 2) and washers (Figure 5, Item 3) from idler (Figure 5, Item 1).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Yoke weighs approximately 80 lb (36 kg).
14. With assistance, remove yoke (Figure 5, Item 4) from idler (Figure 5, Item 1).
15. Remove two blocks (Figure 5, Item 8) and four O-rings (Figure 5, Item 10) from bearing (Figure 5, Item 9).
Discard O-rings.
16. Remove fitting (Figure 5, Item 11) from each block (Figure 5, Item 8).
Figure 5. Yoke Bolts.
0118
END OF TASK