TM 5-2410-240-23-2
0121
REMOVAL
000121
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may result in injury to personnel.
N OT E
The following procedure is for right track brake. Use the same procedure for left track
brake.
Mark position and routing of hoses and lines to aid installation.
1. Loosen tube nut (Figure 1, Item 2) and remove hose (Figure 1, Item 1) from track brake (Figure 1, Item 3).
2. Remove two bolts (Figure 1, Item 5) and washers (Figure 1, Item 4) from opposite sides of track brake
(Figure 1, Item 3).
Figure 1. Brake To Final Drive.
0121