2
TM 5-2410-240-23-2
FIELD MAINTENANCE
-
FINAL DRIVE OIL SERVICE
0120
Drain and Fill
INITIAL SETUP
Tools and Special Tools
Material/Parts - Continued
0
0
Tool Kit, General Mechanic's
Oil, lubricating OE/HDO 15W/40
(WP 0289, Item 51)
(WP 0290, Item 17)
0
0
Adapter, Socket Wrench Drive, 3/4" Male to
Rag, wiping
1/2" Female (S0660) (WP 0289, Item 53)
(WP 0290, Item 21)
0
0
Pan, Drain (S0255) (WP 0289, Item 53)
O-ring (2)
0
0
Gloves, Rubber (S0208) (WP 0289, Item 53)
0
References
0
Goggles (S0209) (WP 0289, Item 53)
0
LO 5-2410-240-13
0
Wrench, Torque, Click, Ratcheting, 1/2" Drive,
250 lb-ft (WP 0289, Item 57)
0
0
Equipment Conditions
Materials/Parts
0
0
Machine parked (TM 5-2410-240-10)
Oil, lubricating OEA, arctic
0
(WP 0290, Item 13)
Estimated Time to Complete
0
0
Oil, lubricating OE/HDO 5W/40
0.5 Hr
0
(WP 0290, Item 16)
0
DRAIN AND FILL
000120
WARN I N G
System is under pressure. Loosen and remove fill plug slowly to release pressure.
Use caution to protect against burns when draining oil.
Contact with oil can damage skin. Wear gloves when handling oil. If oil contacts skin, wash
it off immediately.
Lubricating oil is very slippery. Immediately wipe up any spills.
Refer to local procedures and plans for storage and disposal of drained fluids.
Failure to follow these warnings may cause injury to personnel.
1. Park machine on level ground with final drive in drain position (TM 5-2410-240-10).
0120-1