TM 5-2410-240-23-2
0129
CLEANING AND INSPECTION
000129
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000129
N OT E
Install connectors as noted during removal.
1. Install new O-ring (Figure 1, Item 4) on travel pressure sensor (Figure 1, Item 3).
2. Install travel pressure sensor (Figure 1, Item 3) on tee fitting (Figure 1, Item 5).
3. Position harness (Figure 1, Item 6) to travel pressure sensor (Figure 1, Item 3).
4. Connect harness connector (Figure 1, Item 1) on travel pressure sensor (Figure 1, Item 3).
5. Install new tiedown strap (Figure 1, Item 2) on travel pressure sensor (Figure 1, Item 3).
END OF TASK
FOLLOW-ON TASKS
000129
1. Fill hydraulic oil (WP 0160).
2. Install rear bottom guards (WP 0156).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0129-3/(4 blank)
