TM 5-2410-240-23-2
0129
REMOVAL
000129
N OT E
Tag and mark connectors to aid installation.
1. Remove tiedown strap (Figure 1, Item 2) from travel pressure sensor (Figure 1, Item 3). Discard tiedown strap.
2. Disconnect harness connector (Figure 1, Item 1) from travel pressure sensor (Figure 1, Item 3).
3. Position harness (Figure 1, Item 6) aside.
N OT E
Hydraulic oil will drain from drive motor when sensor is removed.
4. Remove travel pressure sensor (Figure 1, Item 3) from tee fitting (Figure 1, Item 5).
5. Remove O-ring (Figure 1, Item 4) from travel pressure sensor (Figure 1, Item 3). Discard O-ring.
Figure 1. Hydrostatic Drive Motor Speed Sensor.
0129
END OF TASK
