• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Figure 19. Pump Harness.
Figure 21. Rear Motor Mount and Bracket.

Field Maintenance Manual 2 D6K Dozer Type I With Winch and Type II With Ripper
Page Navigation
  780    781    782    783    784  785  786    787    788    789    790  
img
.
TM 5-2410-240-23-2
0133
INSTALLATION CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may result in injury or death to personnel.
N OT E
Pump weighs approximately 158 lb (72 kg).
Engine weighs approximately 1,715 lb (778 kg).
13. Install lifting device on engine (Figure 20, Item 6).
14. Install two lower mounts (Figure 20, Item 5) on machine.
15. Using lifting device, install engine (Figure 20, Item 6) on machine.
16. Install two front mounts (Figure 20, Item 4), washers (Figure 20, Items 1 and 3), and bolts (Figure 20, Item 2)
on machine.
Figure 20. Engine Mount.
0133
0133-19


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.