TM 5-2410-240-23-2
0153
REMOVAL CONTINUED
N OT E
Note location of tiedown straps and tag and mark electrical connectors to aid installation.
25. Unlock and disconnect chassis harness (Figure 14, Item 2) from pressure sensor (Figure 14, Item 3).
26. Disconnect chassis harness (Figure 14, Item 2) from solenoid (Figure 14, Item 4) and from speed sensor
(Figure 14, Item 1).
27. Remove three tiedown straps (Figure 14, Item 5) from rear chassis harness (Figure 14, Item 2), solenoid
(Figure 14, Item 4), pressure sensor (Figure 14, Item 3), and speed sensor (Figure 14, Item 1), and remove
rear chassis harness (Figure 14, Item 2) from machine. Discard tiedown straps.
Figure 14. Solenoid, Pressure Sensor, Speed Sensor, Chassis Harness, and
Retaining Hardware at Left Hydrostatic Motor.
0153
END OF TASK
CLEANING AND INSPECTION
000153
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK