TM 5-2410-240-23-2
0159
HYDRAULIC SYSTEM SUPPLY HOSES AND MANIFOLD REMOVAL CONTINUED
N OT E
Tag and mark hoses and fittings to aid installation.
Use a container to catch any fluid that may drain from hoses or system. Dispose of fluid
IAW local policy and ordinances. Ensure all spills are cleaned up.
Cap or plug hoses, fittings, and open ports.
7. Loosen two clamps (Figure 3, Item 11) and disconnect hose (Figure 3, Item 13) from hydraulic tank (Figure 3,
Item 12) and manifold (Figure 3, Item 10).
8. Remove two clamps (Figure 3, Item 11) from hose (Figure 3, Item 13).
9. Loosen two clamps (Figure 3, Item 8) and disconnect hose (Figure 3, Item 7) from manifold (Figure 3, Item 10)
and winch piston pump (Figure 3, Item 2).
10. Remove two clamps (Figure 3, Item 8) from hose (Figure 3, Item 7).
11. Loosen two clamps (Figure 3, Item 9) and disconnect hose (Figure 3, Item 6) from fitting (Figure 3, Item 5) and
manifold (Figure 3, Item 10).
12. Remove two clamps (Figure 3, Item 9) from hose (Figure 3, Item 6).
13. Remove bolt (Figure 3, Item 14), washer (Figure 3, Item 16), and hose clamp (Figure 3, Item 15) from bracket
(Figure 3, Item 17).
14. Remove three bolts (Figure 3, Item 19), washers (Figure 3, Item 18), and manifold (Figure 3, Item 10) from
bracket (Figure 3, Item 17).
15. Remove three bolts (Figure 3, Item 4), washers (Figure 3, Item 3), and two brackets (Figure 3, Items 17 and 1)
from winch piston pump (Figure 3, Item 2).
0159-4