TM 5-2410-240-23-3
0179
CLEANING AND INSPECTION
000179
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
ASSEMBLY
000179
1. Install two trim pieces (Figure 4, Item 13) on radiator guard (Figure 4, Item 5).
2. Install baffle (Figure 4, Item 7), strip (Figure 4, Item 6), two washers (Figure 4, Item 8), and bolts (Figure 4,
Item 9) on radiator guard (Figure 4, Item 5).
3. Install four bolts (Figure 4, Item 14), strip (Figure 4, Item 10), washers (Figure 4, Item 12), and nuts (Figure 4,
Item 11) on radiator guard (Figure 4, Item 5).
4. Install washer (Figure 4, Item 1), spacer (Figure 4, Item 2), washer (Figure 4, Item 3), and bolt (Figure 4,
Item 4) on radiator guard (Figure 4, Item 5).
5. Install two seals (Figure 5, Item 7) on radiator guard (Figure 5, Item 8).
6. Install two handles (Figure 5, Item 4), four washers (Figure 5, Item 5), and bolts (Figure 5, Item 6) on radiator
guard (Figure 5, Item 8).
7. Install two plates (Figure 5, Item 3), four washers (Figure 5, Item 2), and bolts (Figure 5, Item 1) on radiator
guard (Figure 5, Item 8).
8. Install six plugs (Figure 5, Item 9) on radiator guard (Figure 5, Item 8).
Figure 5. Radiator Guard Hardware.
0179