TM 5-2410-240-23-3
0178
REMOVAL CONTINUED
3. Remove O-ring (Figure 1, Item 4) from sensor (Figure 1, Item 2). Discard O-ring.
Figure 1. Temperature Sensor.
0178
END OF TASK
CLEANING AND INSPECTION
000178
Clean and inspect all parts IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
INSTALLATION
000178
1. Install new O-ring (Figure 1, Item 4) on sensor (Figure 1, Item 2).
2. Install sensor (Figure 1, Item 2) on hydraulic tank (Figure 1, Item 3).
N OT E
Install wiring harness as noted during removal.
3. Connect harness connector (Figure 1, Item 1) to sensor (Figure 1, Item 2).
END OF TASK
FOLLOW-ON TASKS
000178
1. Fill hydraulic system (WP 0160).
2. Install bottom guards (WP 0156).
3. Verify correct operation of machine (TM 5-2410-240-10).
END OF TASK
END OF WORK PACKAGE
0178-3/(4 blank)
