TM 5-2410-240-23-3
0188
REMOVAL CONTINUED
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported by lifting equipment.
Failure to follow this warning may result in injury or death to personnel.
N OT E
Hood support weighs approximately 87 lb (40 kg).
13. Using lifting device and with assistance, remove hood support (Figure 5, Item 1) from brackets (Figure 5, Item
3). Lower hood support onto flat surface.
14. Remove lifting device from hood support (Figure 5, Item 1).
15. Remove seal (Figure 5, Item 2) from hood support (Figure 5, Item 1).
N OT E
Mark position of brackets on machine to aid installation.
16. Remove six bolts (Figure 5, Item 4), washers (Figure 5, Item 5), and two brackets (Figure 5, Item 3) from
machine.
Figure 5. Hood Support, Brackets, and Retaining Hardware.
0188
END OF TASK
CLEANING AND INSPECTION
000188
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
