34
TM 5-2410-240-23-3
FIELD MAINTENANCE
-
VALVE BANK 4 SERVICE (WITH RIPPER)
0196
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
Effectivity Notice (with Ripper)
INITIAL SETUP
Personnel Required
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
Three
0
(WP 0289, Item 51)
0
References
0
Crow Foot 1-5/8" (1/2" Drive)
(WP 0289, Item 15)
0
0
Crow Foot 1-3/8" (1/2" Drive)
Equipment Conditions
0
(WP 0289, Item 83)
0
Machine parked (TM 5-2410-240-10)
0
Gloves, Rubber (S0208)
Hydraulic pressure released (WP 0162)
(WP 0289, Item 53)
0
0
Rear and middle bottom guards removed
Goggles (S0209) (WP 0289, Item 53)
0
(WP 0156)
0
Socket, 1/2" Drive, 6 Point,
Hydraulic system drained (WP 0160)
Long 1-1/2" (S0630)
0
Rear floor plate removed (WP 0206)
(WP 0289, Item 53)
0
0
Wrench, Combination, 1-5/16"
Drawings Required
0
(S0790) (WP 0289, Item 53)
0
TM 5-2410-240-24P, Figures 86, 74, 77, 72,
Wrench, Open-End, 1-3/8" and
78, 65, 75, 43
0
1-7/16" (S0852) (WP 0289, Item 53)
0
Estimated Time to Complete
0
Materials/Parts
0
12.0 Hr
0
Cap set, protective (WP 0290, Item 4)
0
Rag, wiping (WP 0290, Item 21)
0
O-ring (79)
0
REMOVAL
000196
1. Remove four bolts (Figure 1, Item 3), washers (Figure 1, Item 2), and plate (Figure 1, Item 1) from machine.
Figure 1. Bottom Rear Plate.
0196