TM 5-2410-240-23-3
0197
REMOVAL CONTINUED
WARN I N G
Hydraulic oil is very slippery. Immediately wipe up any spills. Failure to follow this warning
may cause injury to personnel.
N OT E
Cap all open ports to avoid contamination.
Note position and routing of all hoses and lines to aid installation.
4. Loosen five tube nuts (Figure 2, Item 5) and disconnect five hoses (Figure 2, Item 1) from valve bank
(Figure 2, Item 2). Position hoses aside.
N OT E
Tag and mark all electrical connectors to aid installation.
5. Disconnect seven connectors (Figure 2, Item 3) from valve bank (Figure 2, Item 2). Position seven harnesses
(Figure 2, Item 4) aside.
Figure 2. Outlet Manifold Hoses.
0197
