TM 5-2410-240-23-3
0237
DISASSEMBLY CONTINUED
000237
N OT E
Note position and depth of seals and bearings before removing.
18. Remove two seals (Figure 23, Item 1) and bearings (Figure 23, Item 2) from housing (Figure 23, Item 3).
Discard seals.
Figure 23. Support Housing Seals and Bearings.
0237
END OF TASK
CLEANING AND INSPECTION
000237
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0282).
END OF TASK
ASSEMBLY
000237
N OT E
Install bearings and seals to same depth and position as noted during removal.
19. Install two bearings (Figure 23, Item 2) and new seals (Figure 23, Item 1) on housing (Figure 23, Item 3).