TM 5-2410-240-23-3
0242
ADJUSTMENT CONTINUED
000242
7. Loosen two limit switch screws (Figure 23, Item 6).
8. Press brake pedal (Figure 23, Item 3) until plunger (Figure 23, Item 8) contacts pedal support (Figure 23,
Item 1).
9. Hold position of brake pedal (Figure 23, Item 3).
N OT E
Limit switch is engaged when click noise is heard.
10. Adjust position of limit switch (Figure 23, Item 7) until switch arm (Figure 23, Item 5) contacts spring (Figure 23,
Item 4) but does not engage.
11. Torque two limit screws to 20 lb-in. (2.25 Nm).
12. Check operation of limit switch (Figure 23, Item 7) by depressing brake pedal (Figure 23, Item 3).
13. The limit switch (Figure 23, Item 7) should engage only after plunger (Figure 23, Item 8) contacts pedal support
(Figure 23, Item 1) and pedal (Figure 23, Item 3) contacts link (Figure 23, Item 2).
Figure 23. Limit Switch Adjustment.
0242
END OF TASK
